Seiko Precision, Inc.

SP-2000 AP

Printer: Narrow Carrage (80 Columns, 10"), 9 pins
Ribbon: BP-16051
Emulation(s): Apple Imagewriter I

* All versions of Microsoft Windows have both the IBM and Epson print drivers bundled with them. Seikosha does NOT supply these print drivers. The only drivers Seikosha supplies are for special printers located in this list.

DIP SWITCH SETTINGS

Note: The printer's power must be turned OFF before making any DIP switch changes.

CAUTION: If you have been printing, allow the print head to cool down before touching it.

To set the DIP switches:
1. Open the printer cover.
2. Remove the ribbon cassette.
3. Manually push the print head to the right side of the printer.
4. Grasp the fin of the compartment cover on the mechanical frame. Slide it to the left, and remove it.

After setting the DIP switches, replace the compartment cover, re-install the ribbon cassette and replace the printer cover.

The DIP switch settings are read only after the initialization process when the printer's power is turned ON, or inputting an ESC c command.

*: When 7-bit data length is selected, the printer ignores the 8th bit (MSB) of data within the printer.

Language Fonts Setting Table

* U.S.A. fonts are selected as shipped from the factory.

Return to Seiko Precision's main page

[RESIST INTERNET CENSORSHIP. GET INFORMED.]